DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Draytek 2866 series

chris777555
Topic Author
Offline
Junior Member

16 Sep 2023 17:30 #102836 by chris777555

Draytek 2866 series was created by chris777555

Bit swap is turned off, how do I turn it back on?

It shows in status bit swap is turned off.

Please Log in or Create an account to join the conversation.

adrianh54
Offline
Member

17 Sep 2023 18:56 #102844 by adrianh54

Replied by adrianh54 on topic Re: Draytek 2866 series

Bitswap would be applied by the exchange /DSLAM management .It's not something you can set.

Please Log in or Create an account to join the conversation.

HodgesanDY
Offline
Member

18 Sep 2023 23:41 #102858 by HodgesanDY

Replied by HodgesanDY on topic Re: Draytek 2866 series

Hi chris777555,

See the V1.3 User’s Guide for your model router.

https://www.draytek.co.uk/support/downloads/vigor-2866?task=download.send&id=3010:ug-v2866-v13&catid=1020#page780

On Pages 771/772 & 777/778 it tells you how to switch the ‘bitswap’ to:

0: Default (On),
1: On
2: Off

Please Log in or Create an account to join the conversation.

ianfretwell
Offline
Member

19 Sep 2023 07:59 #102859 by ianfretwell

Replied by ianfretwell on topic Re: Draytek 2866 series

Presumably if the default is 'on' and the router is showing 'off' then this has been set by the DSLAM and you're still not going to be able to do anything about it?

Or is specifically setting it to 'on' going to force the setting?

Please Log in or Create an account to join the conversation.

HodgesanDY
Offline
Member

19 Sep 2023 08:32 #102860 by HodgesanDY

Replied by HodgesanDY on topic Re: Draytek 2866 series

There appears to be an auto mode and an optional mode for both ADSL and VDSL, so maybe.

I guess it’s worth a try.

Please Log in or Create an account to join the conversation.

chris777555
Topic Author
Offline
Junior Member

20 Sep 2023 20:13 #102869 by chris777555

Replied by chris777555 on topic Re: Draytek 2866 series

I looked at the manual, and I managed to enter log into the telnet cmd, but as a home user, this stuff is too advanced.

What command is it i enter just to enable bit swap?

Please Log in or Create an account to join the conversation.

Moderators: Chris